Details

Application 

1. Purposed 
a) For DC-DC signal isolating only. 
b) For dual or triple DC-DC signal output values. 
c) For many various small sensor signal to a standard analog output. 
d) For industrial control application. 

2. Measured signals 

a) Voltage or Current. 
b) AC or DC 

3. Measuring range :For industrial system, the signal should very small such as mV, mA etc., The measuring output ranges are determined as required. 

4. Input range :The meter input range can be accept from minimum mV to maximum V as required. Input can be accepted various and floating signal, and the terminals are all isolated from the bottom case, aux. power and input/output circuit. 

5. Output range: AC&M has wide output range for available, various analogs 4~20mA or 1~5V etc.. 

6. Operation environment: The meter can be used under normal room temperature from -5’C to +55’C and relative humidity between 20 to 95%.

DC Isolation (TWD)

Class 0.1% – DC Isolation OR Conversion Transmitter 
Single Input – Single Output 
Single Input – Dual Output 
Dual Aux. Power 85/265V AC/DC 

Current Loop (TWS)

Class 0.1% – Current Loop Isolation OR Conversion Transmitter 
Single Input – Single Output 
Single Input – Dual Output 
Input 4~20mA (2 Wire) 
Dual Aux. Power 85/265V AC/DC 

RTD Isolating (TWR)

Class 0.1% – RTD Isolation OR Conversion Transmitter 
Single Input – Single Output 
Single Input – Dual Output 
Input PT 100 (3 Wire) 
Dual Aux. Power 85/265V AC/DC 

Thermocouple (TWT)

Class 0.1% – Thermocouple Isolation OR Conversion Transmitter 
Single Input – Single Output 
Single Input – Dual Output 
Input K,E,J,T,R,S,B Type 
Dual Aux. Power 85V/265V AC/DC 

Frequency to DC (TWF)

Class 0.1% – Frequency to DC Isolation OR Conversion Transmitter 
Single Input – Single Output 
Single Input – Dual Output 
Input via Open Collector, Voltage Pulses, Contacts 
Dual Aux. Power 85V/265V AC/DC 

Potentiometer (TWP)

Class 0.1% – Potentiometer, Level, Position OR Conversion Transmitter 
Single Input – Single Output 
Single Input – Dual Output 
Input via 200 ~ 10K Ohms 
Dual Aux. Power 85V/265V AC/DC 

DC Alarm (TAD)

Class 0.1% – Digital Contact Meter with Isolation and Conversion Transmitter 
DC input – Corresponding to the required display Range. 
User Programmable 
Optional : 2 Relay contact and Signal Output 
Dual Aux. Power 85V/265V AC/DC 

Current Loop (TAS)

Class 0.1% – Digital current Loop Meter with Isolation and Conversion Transmitter 
DC input via DC 4~20mA (2 Wire) 
User Programmable 
Optional : 2 Relay contact and Signal Output 
Dual Aux. Power 85V/265V AC/DC 

RTD (TAR)

Class 0.1% – Digital RTD Meter with Isolation and Conversion Transmitter 
Input PT100 (3 Wire) – Corresponding to the required display Range. 
User Programmable 
Optional : 2 Relay contact and Signal Output 
Dual Aux. Power 85V/265V AC/DC 

Thermocouple (TAT)

Class 0.1% – Digital Thermocouple Meter with Isolation and Conversion Transmitter 
Input K,E,J,T,R,S,B type – Corresponding to the required display Range. 
User Programmable 
Optional : 2 Relay contact and Signal Output 
Dual Aux. Power 85V/265V AC/DC 

Potentiometer (TAP)

Class 0.1% – Digital Potentiometr with Isolation and Conversion Transmitter 
Input 200 ~ 10K Ohms – Corresponding to the required display Range. 
User Programmable 
Optional : 2 Relay contact and Signal Output 
Dual Aux. Power 85V/265V AC/DC 

Load Cell, Strain Gauge (TAB)

Class 0.1% – Digital Load cell, Strain Gauge Transmitter 
Input DC mV – Corresponding to the required display Range. 
User Programmable 
Optional : 2 Relay contact and Signal Output 
Dual Aux. Power 85V/265V AC/DC 

Calculas (TAA)

Class 0.1% – Digital Calculas Alarm Transmitter 
Input DC mV or mA. 
Function as an Adder, Subtractor, Multiplier etc 
User Programmable 
Optional : 2 Relay contact and Signal Output 
Dual Aux. Power 85V/265V AC/DC 

Customized

Customized Isolating Transmitter
If you have specific requirements for input, display, contact, signalling.
Our factory can customize to your specific need when provided details.