SACI was established in 1941 in Madrid, and in 1946 started manufacturing measurement devices, all of them meeting the German Standards.
In the '70s, SACI begins to export other countries.
Our company is committed to maintaining a high standard of product and service quality in line with our customer expectations. To confirm this commitment the company's quality procedures are approved to ISO9000.
This system was certified by TÜV international service group.
We are also aware of environmental management, and we have therefore been audited to the international recognised ISO14001.
SACI sells throughout Spain and exports outside to more than 50 countries.
We have established agents in many areas of the world and actively nurture these links to enable SACI to reach a wider audience.
SACI considers the R+D activity as essential within the company. Our efforts are focused in the constant adaptation of both our present products and the new designs.
Our product-line holds lots of official approvals, such as VDE, Det Norske Veritas, Bureau Veritas, Germanischer Lloyd, etc...
Complete range of analogue meters, covering all sizes, systems and formats.
AC Voltmeter
Voltage measurement in AC applications
Scale: 90 or 240 deg
Dimensions: DIN rail, Square and Rectangular
OPERATED THROUGH A VT
BUILT-IN SWITCH
INSTRUMENTS WITH CONTACT / ALARM
NOMINAL VALUE VOLTMETER
TRUE R.M.S. - 240 deg
MOVING COIL with RECTIFIER
DOUBLE VOLTMETER
Voltage measurement in AC applications
Scale: 90 or 240 deg
Dimensions: DIN rail, Square and Rectangular
OPERATED THROUGH A VT
BUILT-IN SWITCH
INSTRUMENTS WITH CONTACT / ALARM
NOMINAL VALUE VOLTMETER
TRUE R.M.S. - 240 deg
MOVING COIL with RECTIFIER
DOUBLE VOLTMETER
Max Demand Ammeters
For measuring average current in short periods of time.
Exchangeable scale.
Scale: 90 deg.
Dimensions: DIN rail and Square
DIRECT INPUT
MAX. DEMAND AMMETERS
MAX. DEMAND AMMETERS with CONTACT
COMBINED MAX. DEMAND AMMETER
COMBINED MAX. DEMAND AMMETERS with ALARM CONTACT
DC Ammeters
For measuring DC current.
Scale: 90 or 240 deg
Dimensions: DIN rail and Panel Mounting (square and rectangular)
DIRECT INPUT
OPERATED THROUGH SHUNT
EXCHANGEABLE SCALE
WITH ALARM CONTACTS
MILLIAMMETERS
MICROAMMETER
DC Voltmeters (Moving Coil)
Measurement of voltage in DC lines.
90º or 240º scales
Dimensions: Square, rectangular or for DIN rail mounting
DIRECT INPUT
WITH ALARM CONTACT
MILLIVOLTMETER
Frequency Meters
REED and DIAL type frequencymeters.
Panel and DIN rail mounting.
90 or 240 deg scales (Dial type).
Class 0.5
REED FREQUENCYMETERS
POINTER FREQUENCYMETER
FREQUENCY METERS w/ ALARM CONTACTS
DIN RAIL MOUNTING
DOUBLE FREQUENCY METER
Electronic Wattmeters
Our widest range of electronic analogue wattmeters available for measuring active power in single or three phase connections.
For balanced and unbalanced loads, and 3 or 4 wires connections.
90 deg or 240 deg scales.
EXCHANGEABLE SCALE
SINGLE PHASE
THREE PHASE BALANCED
THREE PHASE UNBALANCED
DIN RAIL MOUNTING
Electronic Varmeters
For measuring the reactive power in either single or three phase networks.
90 deg or 240 deg scales
DIN rail and panel mounting.
SINGLE PHASE
THREE PHASE BALANCED
THREE PHASE UNBALANCED
EXCHANGEABLE SCALE
DIN RAIL MOUNTING
Ferrodynamic Wattmeters
Suitable for active power measurement in single or 3-Phase networks.
Available for 3 or 4 wires connections, balanced or unbalanced loads.
90 deg scale - Square meters
SINGLE PHASE
THREE PHASE, BALANCED WATTMETERS
THREE PHASE, UNBALANCED WATTMETERS
Ferrodynamic Varmeters
For measuring reactive power in either single or three phase networks.
90 deg scales.
Panel Mounting.
SINGLE PHASE
THREE PHASE BALANCED
THREE PHASE UNBALANCED
Electronic Power Factor Meters
Power factor mesurement in single and three phase networks.
90 deg or 240 deg scales - Square meters.
SINGLE PHASE
3 PHASE BALANCED
DIN RAIL MOUNTING
Synchronizing Equipment
Parallel connection between two AC sources or one source and the line.
Scale: 90 deg or 240 deg.
Dimensions: Rectangular
SINGLE PHASE
THREE PHASE
Induction Power Factor Meters
For power factor measuring in either single or three phase networks.
90 deg or 360 deg scales.
Panel mounting instruments.
SINGLE PHASE
3 PHASE BALANCED
3 PHASE UNBALANCED
Other Measurements Instruments
Depending on the user requirements, SACI offers a set of customized solutions for especial applications.
90 deg or 240 deg scales. Square or Circular
MOBILE INSTRUMENTS FOR RAILWAY APPLICATIONS
TEMPERATURE
NON ELECTRICAL VARIABLES
ELAPSED TIME METERS
PHASE SEQUENCE INDICATORS
INSULATION INDICATOR
MIN-MAX VOLTAGE AND FREQUENCY RELAY
SYNCHRONIZING SCOPE
SYNCHRONIZING RELAY
ENERGY METER – KWH
Please let us know your requirement, our sales representative will be able to provide relevant product information and support.
AC Ammeter
For measuring current in AC applications
Scale: 90º or 240º
Dimensions: DIN rail, Square and Rectangular
DIRECT INPUT
OPERATED THROUGH A CT.
BUILT-IN SWITCH
EXCHANGEABLE SCALE
WITH ALARM CONTACTS
MOVING COIL w/ RECTIFIER
TRUE R.M.S. - 240 deg
MILLIAMMETERS
For current measurement and protection in different formats.
Measuring Transformers (Plastic Casing)
Designed to measure current in AC networks.
Primary current: 5 - 5000A
Secondary current: /5A or /1A
Class: 0.5 - 1 – 3
WOUNDED PRIMARY
Current measurement in AC lines
Class: 0.5, 1 and 3%
BUS BAR CTs
PRECISION : 0,5 ; 1 y 3 %
Measuring Transformers (Encapsulated in Resin)
For current measurement purposes in AC lines.
Primary current: 5A - 6000A
Secondary current: /5A or /1A
Class: 0.5 - 1 – 3
WOUNDED PRIMARY
BUS BAR
SPLIT CORE CT's
FOR MEASUREMENT EQUIPMENTS (ENERGY METERS)
THIN PROFILE
THIN PROFILE - FLAT BAR
Split Core Current Transformers (Resin Encapsulated)
Class: 0.5 - 1 – 3
RANGE FROM : 100A ~ 5000A
Protection Transformers (Plastic Casing)
Protection for AC lines
Primary current: from 50A through 5000A
Secondary current: /5A
Class: 5P10 - 10P10
WOUNDED PRIMARY
BUS BAR
Protection Transformers (Encapsulated in Resin)
Protection for AC lines
Primary current: from 50A through 5000A
Secondary current: /5A
Class: 5P10 - 10P10
WOUNDED PRIMARY
BUS BAR
Transformers with Built-In Transducer
They work as a regular CT, but secondary current is processed by an internal transducer.
Output signal is mA.
0-20mA OUTPUT
4-20mA OUTPUT - MULTIRATIO
Summation CT and Voltage Transformers
SUMMATION: This product adds up to 5 currents (AC).
Primary: 2 through 5 currents.
Class: 0.5%
VOLTAGE TRANSFORMERS
Our VT are for voltage measuring purposes.
All kind of meters. Different sizes and 3, 3½ and 4½ digits.
AC Ammeter
R.M.S. (4 1/2 DIGITS)
AC Voltmeter
Double & Triple - AC or DC
Measurement of 2 or 3 signals in a single instrument.
3½dígits Square flush mounting
ALTERNATING CURRENT
DIRECT CURRENT
Max. Demand Ammeter (4 Digits)
Control and measurement of current in AC or DC lines. An alarm can be set by the user at the desired value.
4 digits Square Flush Mounting
AC (alternating current)
DC (direct current)
DC Ammeters (3 1/2 Digits)
Measurement of current on DC lines.
DISPLAY: 3½ or 4½ digits
Square or rectangular meters
DIRECT INPUT
DC Voltmeters (3 1/2 Digits)
Frequency Meters
Wattmeters (3 1/2 and 4 Digits)
Varmeters (3 1/2 and 4 Digits)
Power Factor Meters (3 1/2 Digits)
Special Instruments
% Meter
Temperature Meter
RPM etc
Our kWh meters are used by both end users and power utilities.
Suitable for DIN rail and panel mounting.
Energy Meters for Din Rail Mounting
SACI offers its widest range of energy meters for DIN rail.
Every single end user will find a solution here.
Single Phase - Direct Input
Active energy measurement of single phase networks.
Impulse output for remote monitoring.
Class 1.
Three Phase - Direct Input
Active energy measurement of a 3 phase network.
Impulse input for remote monitoring purposes.
Class 1.
Three Phase - Operated Through External CT
Active and/or reactive energy measurement of a 3 phase network.
Impulse output for remote monitoring purposes.
Class 1.
Energy Meters for Panel Mounting
Our panel energy meters work with either direct input or operated through an external CT. DIN size 96x96, with local display and pulse output.
3-Phase Energy Meters for Power Utilities
Our CTMR is a multifuntion energy meter approved by the Spanish power utilities.
Class 1 for Ea and Class 2 for Er
LOW VOLTAGE - DIRECT INPUT – CTMRD
LOW VOLTAGE - THROUGH CT – CTMR
MEDIUM VOLTAGE - THROUGH CT - CTMR
Impulse Totalizer Terminal "TTI" (Din Rail)
The TTI collects impuls signals from the energy meters and sends it along through a RS-485 line for remote monitoring purposes.
PULSE TOTALIZER TERMINAL
PULSE TOTALIZER TERMINAL with DISPLAY, MEMORY and LOAD PROFILE
- For monitoring both AC and DC power networks.
- Panel and DIN rail.
- LED or LCD.
- Software available
AC NETWORK ANALYSERS (LCD)
For measuring and displaying all network parameters from voltage and current signals.
Panel and DIN rail mounting
AC NETWORK ANALYSERS (LED)
For measuring and displaying all network parameters from voltage and current signals.
Panel and DIN rail mounting
DC NETWORK ANALYSERS (LCD)
For measuring and displaying DC network parameters from voltage and current signals.
DIN rail mounting.
DC NETWORK ANALYSERS (LED)
For measuring and displaying DC network parameters from voltage and current signals.
NET QUALITY ANALYSERS (LCD)
For measurig and registering voltage events on a Network.
Panel mounting.
RS-232/RS-485 CONVERTERS
IFR equipment converts the RS232 standard levels to the corresponding levels in the RS485 standard.
DIN rail mounting.
MH Digital Meters
48 X 96 size for commonly used Digital Meters.
Accuracy Class ± 0.5% Digital Frequency Meter Ammeter with Voltmeter with selectors switch Ammeter, Voltmeter and Frequency meters with selectors switch
With our extensive years of experience in the electrical industry market, we are familiar with industrial needs and requirement.
We have developed our in house economical and quality meter for the market demand. We also custom-make and calibrate special instruments for our customers.
